4 Mounting SMA America, LLC
20 SB6-11TL-US-IA-en-13 Installation Manual
4.2 Requirements for the Mounting Location
Requirements
☐ The installation method and mounting location must be suitable for the weight and dimensions
of the Sunny Boy (see Section 11"Technical Data",page70).
☐ Note the dimensions of the DC Disconnect (4.3"Mounting the DC Disconnect",page25).
☐ Mount the inverter on a stable surface.
☐ The mounting location must be accessible at all times.
☐ Mount vertically or tilted backward at max. 15°.
☐ The connection area must point downward.
☐ Do not install the inverter tilting forward.
☐ Do not install the inverter horizontally.
☐ Install the inverter at eye level in order to be able to read out the operating state at any time.
☐ The ambient temperature must be in a permissable range ("Technical Data" on page 70).
☐ Do not expose the inverter to direct sunlight.
☐ In the living area, do not mount inverters on a
plasterboard wall or similar wall.
The Sunny Boy may emit noises when in use which
can be regarded as a nuisance.
Comments to this Manuals