Sma SB 6000TL‑US Installation User Manual download pdf (Page 27)

SMA America, LLC 4 Mounting

Installation Manual SB6-11TL-US-IA-en-13 27

4.3.1 Mounting the Sunny Boy on a Wall Mounting Bracket

1. Remove the handle covers on the right and left side of the Sunny Boy.

The Sunny Boy may fall down due to inappropriate mounting

Contusions or bone fractures due to the heavy weight of the Sunny Boy.

• Transport the Sunny Boy between two persons, using the side handles above and below.

Put a steel bar with a maximum diameter of 1

⁄

in. (30 mm) through the enclosure opening

above and transport it between two people.

3. Hook the Sunny Boy with the enclosure opening

onto the rear panel in the wall mounting bracket. The

Sunny Boy must be seated on the middle of the wall

mounting bracket.

4. Screw the Sunny Boy onto the wall mounting bracket

on both sides with the screws supplied.

5. Tighten the screws clockwise with a tightening torque

of 44 in-lb. (5 Nm).

6. Plug handle covers on the handles.

To help you identify the sides, the ventilation grids

are marked "rechts/right" and "links/left" on the

inside.

The ventilation grids prevent dirt and insects from

entering the inverter and can be reordered from

SMA if required. See Section 12"Spare Parts and

Accessories",page88

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

No comments

Sma SB 6000TL‑US Installation User Manual Page 27