Sma POWER REDUCER BOX User Manual download pdf (Page 23)

SMA Solar Technology AG 5 The Power Reducer Box User Interface

User Manual REDUCERBOX-BA-en-16 23

5.5 Context menu

5.6 Status Page

On the "Status" page, an overview of the current status of the PV plant is given in the upper area.

The following information is shown:

Menu item Function

Sunny WebBox registration This menu item opens the "Sunny WebBox registration"

page (see Section 8.2"Sunny WebBox Registration in the Power

Reducer Box",page38).

Status configuration This menu item opens the "Status configuration"

page (see chapter 8.3"Configuring Operating Modes",page40).

Password settings This menu item opens the "Password settings" page.

Sunny Portal settings This menu item opens the "Sunny Portal settings"

page (see Section 4.4"Sunny Portal",page18).

Update settings This menu item opens the "Update settings" page (see Section

10.6"Firmware Update for the Power Reducer Box",page55).

Device status The device status displays the overall status of the Power Reducer Box.

Operating mode The operating mode displays the setpoint that the Power Reducer Box

is currently implementing.

Setpoint (set) The setpoint (target) displays the values that have been configured in

the Power Reducer Box for the parameter.

Setpoint (current) The setpoint (current) displays the values that are currently being

implemented.

Status of the input ports The status shows the current incoming signal from the ripple control

receiver. K1 to K4 relate to the respective connected relays. If no signal

is incoming, the value "Open" is displayed.

Display of the current status of the Power Reducer Box

The device status is also displayed on the login page of the Power Reducer Box.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 79 80

No comments

Sma POWER REDUCER BOX User Manual Page 23